Call us +34 957 014 266
Keep updated on our developments
Newlite electronic ballast CMH 315W
Newlite CMH Technology
Newlite CMH LEC 315W Ballast

The digital Newlite CMH LEC 315 W ballast is used as a lighting system component and is installed separately from the lamp and the reflector.

It is used with CMH LEC lamps in greenhouses and small and medium growing areas, or where a high light intensity is not required.

A C13 ballast output connector allows the connection to a reflector using a standard C14 cable.

It is protected against lamps that are worn due to use, short circuit, open circuit (lamp not installed), and start failure (lamp in poor condition), as well as thermal protection.

Newlite CMH LEC 315 W is a low frequency, square wave ballast lamp that allows to obtain the best performance in CMH lamps.

The use of ballasts that are not suitable for CMH or LEC lamps causes them to deteriorate rapidly.

CMH LEC lamps are non-dimmable and so this ballast has no control option, in order to protect the lamps during their entire useful life and thus obtain the best growing performance.

 

Relevant Features
Built-in voltage stabiliser.
Digital, electronic, adjustable low-frequency ballast.
Designed for CMH LEC 315 W lamps.
Safety protection to extend the life of the lamp, warm start.
Technical Specifications
Maximum AC Input Power
315 W
AC Input Voltage
208 V ~ 250 V
Power Factor
> 0.99 φ
Input Frequency
50-60 Hz
Output Frequency
170 Hz
Total Harmonic Distortion (THD)
< 8%
Control Signal
0 ~ 10 V
Environment Temperature
-25 ºC ~ 35 ºC
Environment Humidity
0% ~ 90%
Dimensions
270 mm (Length) x 105 mm (Width) x 70 mm (Height))
Weight
2.5 kg
Certifications
CE, RoSH
Spec sheet*