CMH Luminaire 315W
The CMH Luminaire 315W is used for CMH lamps with a PGZX18 connector in greenhouses and small and medium-sized indoor growing areas.
It achieves 600W HPS equipment with 50% less energy consumption, producing half the heat.
High quality closed aluminium reflector with a high light reflection coefficient. Silver 9. Manufacturer Alanod.
The extruded aluminium structure makes it very robust.
Input specifications
DescriptionMinimumMaximumComments
| Input voltage | 175V AC | 265V AC | |
| Input frequency | 50/60Hz | ||
| AC input Current | 6.27A | 6.92A | Measured at full load and 175 V AC input |
| 4.14A | 4.57A | Measured at full load and 240 V AC input | |
| Ignition delay time | 1-2s | 3s | |
Protection specifications
FunctionsTemperatureComments
| Overheating protection | 65ºC | Ambient temperature |
| Open, short circuit protection | Yes | |
| Ballast waterproof rating | IP50 |
Output specifications
| Lamp electrical data | Performance data | ||
|---|---|---|---|
| Lamp Power | 1000W | Lumen per watt (approx. depends on lamp) | 105lm/w |
| Lamp Voltage | 215V | CCT | 2050K |
| Ignition position | Horizontal | ||
Temperature specifications
| Description | Minimum | Maximum | Comments |
|---|---|---|---|
| Ambient temperature | -15ºC | +45ºC | Humidity: 10% RH to 100% RH |
General specifications
DescriptionMinimumMaximumComments
| Efficiency | 93.00% | 95.00% | |
| Guarantee period | 2 Years | At an 380V AC input, full charge. | |
| Dimensions (LxWxH) | 560x325x144 | mmxmmxmm | |
| Weight | 6.8Kg | ||